FILL-FOR-LIFE PHOSPATE ESTER
Keep your fluid clean and dry
Moisture is the root cause for many contamination issues in EHC systems. Because phosphate esters are hydroscopic moisture control is a critical step in phosphate estermaintenance. StealthEHC
usespatentedtechnology that removes moisture from phosphateester fluids by introducing a steady stream of clean, dry air in the reservoir. Thisenhancesreservoir breathingsystems by actively and continuouslypurging and dehydrating the reservoirheadspace and removing water from the fluid.
- Removes dissolved moisture in oil
- Prevents the formation of condensateand rust in the oil reservoir capacity
- Eliminates the need to replace costly desiccant style breathers
- Reduces acid formation by removing water
- Minimizes the potential for particulateor water ingression through reservoiraccess points
- Approved by GE Energy
- Enables a Fill-For-Life Phosphate Ester Fluid
Stealth EHC uses the principle of mass transfer. When the humidity of the fluid is greater than that of the air (headspace), water molecules transfer to the dry air and the fluid becomes dry
THE RESULTS ARE CLEAR…
FILL-FOR-LIFE PHOSPATE ESTER, NO LABOR
Stealth EHC + Endure IX + VITA VOLT
System cleanliness is restored with no outage requirements. Fluitec provides Stealth EHC to remove existing moisture and prevent any further water contamination, Endure IX to bring the fluid acidity back to ideal conditions and VITA VOLT to remove micro-dieseling byproducts.
HOW IT WORKS
Our StealthEHC system blankets your reservoir headspace with our super-dry clean air. A low pressure air purge in the headspace accomplishes two important tasks simultaneously: It extracts moisture from the fluid while excluding other contaminants from getting in the system. The result is exceptionally clean, dry oil. The system is inexpensive to install, has no moving parts or electrical connections, and requires no maintenance. Quite simply, the Stealth EHC is the highest value contamination control technology you will install at your plant
Fluitec provides the optimum blend of media to target specific contaminants. There are media that specifically remove stronger acids, ones that remove weak acids (phenolic alcohols and varnish-forming molecules) and media that removes dissolved metals from the fluid. As the fluid makes contact with the blended Endure IX media the process of physisorption removes the contaminants. It is recommended to install Stealth EHC along with the Endure IX for optimum performance.
Using high voltage parameters and fluid flow rates, VITA VOLTunits remove hard particles down to nanometer sized soot particles from most non-detergent fluids. Specifically engineered for faster removal of micro-dieseling byproducts than competing units, VITA VOLT’s collector elements maximize high voltage electrophoresis and di-electrophoresis more efficiently than any other collector element on the market.
QUESTIONS ABOUT STEALTH EHC MOISTURE REMOVAL?